STEEL ASEMBLING FACILITIES

79,139.78 FT² of steel asembling facilities; cut and ready to ship and place on site.

MINI SYNTAX 16 HS

It is used for the production of stirrups, large profiles and bars cut to size with one or two brackets.
The steel coil is unraveled from the coil with the action of the main towing group, straightened by the straightening groups and shaped by the bending device.
The secondary drag allows the production of stirrups of great dimensions and bars with curvatures at both ends.
It is used for the production of straight cuts, straight cuts with 1 or 2 squares or stirrups of greater dimension (2,400 mm).
Production capacity of 1 Thread: Roll from #2 to #5, production of 2 threads: from #2 - #4.

PRODUCES UP TO 10,000 KG PER DAY.

COIL 16

The COIL 16 machine is used for the production of straight cut, straight cut with one or two squares, stirrup, staple, saddles.
Production capacity of 1 thread: Roll from #2 to #5, production of 2 threads: from #2 - #4.

 

PRODUCES UP TO 8,000 KG PER DAY.

PRIMA 13

The PRIMA 13 machine is used for the production of ribs, stirrups and hooks for our precast elements.
Production capacity of 1 thread: Roll from #2 to #4.

2 thread production: from #2 - #3.

 

PRODUCES UP TO 4,000 KG PER DAY.

PRIMA 16

The PRIMA 16 machine is used for the production of straight cuts, straight cuts with 1 or 2 brackets, large stirrups, staples, circular stirrups, pile straps.
Production capacity of 1 thread: Roll from #2 to #5, production of 2 threads: from #2 - #4.

 

PRODUCES UP TO 8,000 KG PER DAY.

BAR WISER 28

Powerful stirrup bending machine with two bending heads for the production of bar iron with processing capacity up to Ø 28 mm or double Ø 20 mm or triple Ø 12 mm. In addition, thanks to the two bending groups with which the machine is equipped, it allows:
- Increase productivity thanks to the elimination of idle times due to the transfer of the head from the upper working line to the lower one;
- Carry out simultaneous bending: an almost simultaneous processing of the two bending heads is obtained in the respective lines of work.
- Automatic loading of the bar with the application of "GENIUS": the operator becomes a supervisor of the process.
The BARWISER 28 machine is used to enable main elements with straight rods, piles, footings, beams, columns, walls, slabs, etc.
Production capacity of 1 thread, straight rod from #2 to #8, production of 2 threads, from #2 - #6, production of up to 3 threads from #2 - #4.
Technical characteristics of the raw material Grade 42 and Grade 60 steel.

PRODUCES UP TO 12,000 KG PER DAY.

 

 

CHV-160 CUTTING MACHINE AND P-60 BENDING MACHINE

There is a chv-160 cutter for the cutting process, adjusting the element to the programmed size, as well as a manual P-60 bending machine that is used to enable steel for beams, columns.
Rebar production capacity from #10 to #12.

PRODUCES UP TO 15,000 KG PER DAY.

 

Línea de roscado - Planta de habilitado de acero - Anteus Constructora

SKZ THREADING LINE

We have an automatic threading line, which is made up of a cutting line, two punching machines for the process of enabling rods with pneumatic connectors, as well as trained labor for the process.
We handle quality criteria, as well as make sure that the entire process is optimal and efficient.
We have a quality assurance department, which is in charge of validating the entire process, as well as ensuring that the finished product meets our quality criteria. Tests are carried out to ensure the quality of the process and the connector that are sent to an external laboratory, which is certified by EMA N°MM-0635-087/15.

WE HAVE A PLANT PRODUCTION CAPACITY OF UP TO 200 THREADS PER DAY.